How to Replace a Euro Cylinder Lock in 5 Minutes
How to Replace a Euro Cylinder Lock in 5 Minutes
Thinking of upgrading your home or office security? Replacing a Euro cylinder lock is surprisingly quick and easy – no professional locksmith needed. Here’s your step-by-step guide to a stress-free swap in under 5 minutes.
🧰 What You’ll Need:
- New Euro cylinder (like our 60mm Key Cylinder)
- Flathead screwdriver
- One of the original keys
🔧 Step-by-Step Guide
1. Remove the Fixing Screw
Locate the long screw on the side of your door (near the latch). Unscrew this using your screwdriver—it holds the cylinder in place.
2. Insert and Turn the Key
Insert the key into the cylinder and turn it slightly left or right (about 10 degrees) to align the cam with the lock mechanism. This allows the cylinder to slide out easily.
3. Slide Out the Old Cylinder
While holding the key in that turned position, gently pull the cylinder out of the door.
4. Insert the New Cylinder
Repeat the process in reverse: Insert the key into your new lock, turn slightly, and slide the cylinder into the same space.
5. Secure the Cylinder
Reinsert the long screw to hold the new cylinder in place. Tighten securely, but don't overdo it.
🔐 Job Done – In Under 5 Minutes!
That’s it! You’ve successfully replaced a Euro cylinder lock. Now enjoy the peace of mind that comes with new, precision-engineered security.
Explore Our Euro Cylinder Range:
Need help selecting the right size? Check out our guide: How to Choose the Right Euro Cylinder Lock.
❓ FAQ – Replacing Your Lock Made Easy
Is it safe to change a lock cylinder on my own?
Yes, it's very safe. Euro cylinders are designed to be replaced without removing the whole lock mechanism. Just follow the step-by-step guide using basic tools.
What tools do I need to replace a Euro cylinder?
You'll need a flathead screwdriver and one key for the existing lock. That’s all!
Do I need to remove the door to replace the cylinder?
No, the cylinder can be replaced with the door in place. You only need access to the side where the fixing screw is located.
How do I know if my cylinder is centered?
Look at the position of the fixing screw hole. A 30/30 (60mm) cylinder is centered, while offset cylinders (e.g., 35/45) are asymmetrical. Measure from the center screw hole to each side for confirmation.
What if my new lock doesn’t fit?
If the cylinder protrudes too much or doesn’t align properly, you may need a longer or shorter model. Consider checking our sizing guide or contacting support.